HealVet 3000 Tri-Level Quality Control (QC) Test Kit

HealVet 3000 Tri-Level Quality Control (QC) Test Kit
 
The HealVet 3000 Tri-Level Quality Control Test Kit is designed to verify the performance of the HealVet 3000 veterinary fluorescence immunoassay analyzer.
The QC system provides Low, Mid, and High control levels, allowing users to confirm analyzer performance across multiple measurement points and help maintain confidence in day-to-day testing. HealVet recommends periodic quality-control checks as part of routine analyzer maintenance.
Key Features
Three-level quality control: Low, Mid, and High
Designed for the HealVet 3000 Analyzer
Helps verify analyzer performance
Fast and simple QC procedure
No patient sample required
Useful for routine system checks and troubleshooting
Designed specifically for HealVet fluorescence immunoassay testing
How to Use
Set the HealVet 3000 to the appropriate instant/quick testing mode.
Load the required QC information into the analyzer.
Run the Low control.
Run the Mid control.
Run the High control.
Compare the results with the acceptable QC ranges supplied with the kit.
The HealVet 3000 can display and print the QC results directly from the analyzer.
Recommended Use
HealVet recommends using a quality-control card approximately every four months as an additional performance check for the HealVet 3000. QC testing may also be useful after extended periods of non-use, when troubleshooting unexpected results, or whenever additional verification of analyzer performance is desired.
Compatibility
Compatible Analyzer: HealVet 3000 / HV-FIA 3000
For veterinary diagnostic use. Follow the instructions and acceptable control ranges supplied with the QC kit.